Ikon IK23 Installation And User Manual Download Page 4

12/12/2018

4

WARNING AND SAFETY PRECAUTIONS

n

This appliance can be used by children of 8 years and older,

people with physical, sensory or mental capability deficiency or

people with lack of experience or knowledge; as long as they

are provided supervision or instructions for the safe use of the

appliance and they comprehend the dangers.

n

Children should not tamper with the appliance. Cleaning and

user maintenance operations must not be performed by chil-

dren unless supervised.

n

This product is designed for home use.

n

Usage voltage of your product is 220-240 Volt~50-60 Hz.

n

Power cord of your product is fitted with a grounded plug. This

cord must be plugged into a grounded outlet.

n

The whole electrical wiring must be installed by a qualified

electrician.

n

Installation by unauthorized persons could lead to poor opera-

tion performance, damage to the product, and accidents.

n

Feeder cable of the appliance mustn't be exposed to jamming

or crashing during assembly. Feeder cable mustn't be placed

near the cooker. In such cases, it might melt down and lead to

fire.

n

Do not plug in the appliance before the installation.

n

Make sure that the installation place allows the user to easily

unplug the power cable in case of any danger.

n

Do not touch your product's lamps when they work for a long

time. The lamps may burn your hand as they will be hot.

n

Kitchen hoods are manufactured for household use in normal

home cooking. There is a risk of malfunction in other types of

use, and the product guarantee will be void.

n

Comply with the rules and instructions regarding discharge of

outgoing air, stipulated by the relevant authorities. (This

warning does not apply to uses without flue.)

n

Flammable foods must not be cooked under the appliance.

n

Start your product after you place pot, pan etc. on the stoves.

Otherwise, high temperature may cause same parts of your

products to deform.

n

Turn off the cooker's burner before taking the saucepan, pan,

etc. off the cooker.

n

Do not leave boiling oil on the stove. Pots that contain boiling

oil may catch fire by itself.

n

Since oils could catch fire when you cook fried foods in partic-

ular, be careful about your curtains and tablecloths.

n

Ensure timely replacement of the filters. Filters not replaced in

a timely manner pose risk of fire due to accumulated grease

deposits on them.

n

Do not use non-fire-resistant filtering materials instead of the

filter.

n

Do not operate your product without filter, and do not remove

the filters when the product is in operation.

n

In case of any fire, de-energize the hood and any other cooking

devices. (Plug off the appliance or turn off the main switch.)

WARNING AND SAFETY PRECAU-

TIONS

WARNING AND SAFETY PRECAUTIONS

 

07.02.2019

4260 HOOD USER GUIDE

6

Summary of Contents for IK23






















Reviews: