manualshive.com logo in svg

Ikon 7505-BT, Manual, Page: 60 / 406

Share
Download
Ikon 7505-BT Manual Download Page 60

Chapter 3: Get To Know The Ikôn

Aligning (Calibrating) The Touchscreen

46

Ikôn Rugged PDA (Windows Mobile 6.1) User Manual

•

Tap on 

Start>Settings

. Tap on the 

System

 tab to display the 

Screen

 icon.

•

Tap on the 

Screen

 icon to display the 

Alignment

 tab.

•

Tap on the 

Align Screen

 button, and follow the directions on the screen to align (cali-

brate) the screen.

Note: This window provides two additional tabs: ClearType and Text Size. Tapping on the 

ClearType tab allows you to enable the ClearType option to smooth screen font 
appearance. The Text Size tab allows you to increase or decrease the size of the font 
displayed on the screen.

Summary of Contents for 7505-BT























































































































































































































































































































































































































Reviews:

No comments