manualshive.com logo in svg

Ikon 7505-BT, Manual, Page: 191 / 406

Share
Download
Ikon 7505-BT Manual Download Page 191

Chapter 6: Settings

Bar Code Settings – The Scanner Menu

Ikôn Rugged PDA (Windows Mobile 6.1) User Manual

177

•

Tap on 

Start>Settings

, and then tap on the 

System

 tab followed by the 

Teklogix 

Scanner

 icon.

6.33.1 Bar Code Settings – The Scanner Menu

The dropdown menu to the right of the 

Scanner

 option allows you to choose from one of the 

following scanner types used with your Ikôn: 

Decoded (internal)

, 

Decoded (Intermec ISCP)

 

or 

Imager

.

The symbologies listed change to reflect the scanner you choose and the bar codes 
it supports. 

Important:  Appendix D: “Bar Codes Settings” provides descriptions of the bar codes 

listed in the scanner menus.

Summary of Contents for 7505-BT























































































































































































































































































































































































































Reviews:

No comments