Ikon 7505-BT Manual Download Page 135

Page: 135 / 406

Chapter 6: Settings

Settings

Ikôn Rugged PDA (Windows Mobile 6.1) User Manual

121

6.1

Settings

The

Settings

screen is divided into three tabs –

Personal

System

and

Connections

•

Tap on

Start>Settings

to display this screen.

Figure 6.1 Settings Tabs

6.2

Personal Settings

The

Personal

tab allows you to tailor the general behaviour of your Ikôn such as defining

input methods,

Start

menu options, owner information, password assignment, sound specifi-

cations, and so on.

6.3

App Launch Keys

The

App Launch Keys

icon allows you to map a key to an application so that you can then

launch the application from a single key-press.

Summary of Contents for 7505-BT























































































































































































































































































































































































































Search results

Summary of Contents for 7505-BT

Reviews:

Ikon 7505-BT, Manual, Page: 135 / 406

Search results

Summary of Contents for 7505-BT

Reviews: