Instructions for installation and use | IKI electric heaters with Finlandia control unit Page
5
Display menu
TEMPERATURE
GOAL
TEMPERATURE
HEATING TIME
TIMER
The settings menu includes these setting options. To move from one to the
other, press the menu button.
Settings
PARAMETRE
RANGE
MEASURE
DEFAULT
Goal temperature
40 … 110 *C
1 *C
60 *C
Operating time
1h … 4h
30 min
1h
Timer
0,0h … 24h
30 min
0h
Goal temperature
The heating temperature can be adjusted within the range of one celsius grade. The minimum is 40 degress,
maximum 110. The setting is stored in device's memory.
The goal temperature can be adjusted in two ways:
1.
Press Menu button until the goal temperature is shown on the display. Press (
˄/+
) or (
˅/‐
)
buttons to change the pre-settings. If no buttons are pressed for 10 seconds, the home menu
returns. You can exit the settings mode by pressing the menu button repeatedly.
2.
When the display shows heater temperature, press (
˄/+
) or (
˅/‐
) buttons to set the goal
temperature directly. Exit settings as above.
Operating time
The heater can be set to operate for 1 to 6 hours. You can adjust the time in 30-minute intervals. The time must
be set when the heater is off. The settings are stored in the device's memory. The settings can be adjusted by
pressing the menu button twice in succession. To adjust the operating time while the heater is on: when the
operating time is shown on the display, press (
˄/+
) or (
˅/‐
) buttons to reduce or increase the operating time.
The adjustment range is 15 minutes. This setting will not be stored in the device's memory. The setting can be
readjusted by pressing the menu button twice.
