IKI Corner IKI 6 kW, Instructions For Installation And Use Manual

Page: 7 / 24

6
PRIOR TO INSTALLATION
Before you begin installing the heater, pay attention to the following
points in the heater:
• Beware of the sharp edges of the stainless-steel mesh. Use a long-sleeved
shirt and protective gloves during the installation and once taking the heater
out of the cardboard box.
•
Read through this installation manual and the separate control unit manual
before you begin the installation of the heater.
•
ATTN! This manual must be left with owner, manager or operator of the
Sauna after it is tested/used by electrician.
•
The heater volume should be suitable for the sauna room volume. (Page 13:
Model table) shows the recommended sizes for each heater power output.
•
A precondition for the given values is that the sauna room is well insulated.
Walls and ceiling are covered with wood panel.
• Check that supply voltage and amperages are available for the heater in
the building and main power supply (Page 12: Supply wiring)
• The breakers and the connection cables conform with valid regulations
and their dimensions are in accordance with regulations
• The location is suitable for the heater (Page 12: Safety distances)
Attn! Do no insulate the space between the heater and the wall.