- -
13
4 To change the damaged or abrasion cable in time.
5 Keep dry, including cloth, working area, wire, welding torch, soldering turret and power supply.
6 Keep the body insulated from the work piece and ground.
7 The operator shall stand on a dry wooden board or insulating platform of rubble shoes when working in a
sealed on moist area.
8 The dry and sealed glove shall be wore before turning on the power.
9 The power should be turned off before taking off the glove.
Electromagnetic field---- It can bring dangerous. So:
1 The worker that the heart pacemaker imbedded shall do some consultation with the doctor before doing
welding; because the electromagnetic field may disturb the normal work of have pacemaker.
2 The electromagnetic is unhealthful.
3 The worker shall take the following measures to down times. exposing himself to the electromagnetic field:
(1) Put the electrode cause and work cable together, and also the tape can used if possible.
(2) Do not wind the welding touch cable and work cable round yourself.
(3) Put the welding torch cable and work cable on one side of yourself.
(4)Connect the work cable to the work piece, and make it to the welding area as nearly as possible.
(5) Make yourself away from welding source and cable as much as possible.
Fog and gas----The welding fog and gas can make the worker uncomfortable, on
hunted, especially in the limited icescape, so do not breathe the fog and gas. So:
1 The aerator natural on mechanical shall be prepared in the working area. Do not do welding on the
following metals (galvanized, seed, stainless steel, copper, zinc, read, beryllium or calcium), and also do
not breathe the welding fog and gas in.
2 Does not welding near the degreasing or spraying operation to avoid the poisonous gas phosgene or other
imitates gas.
3 If you feel little imitate to the eyes, nose or threat. You shall stop welding and perfect the aerator. And you
should stop welding at once if feeling comfortlessness.
Equipment maintenance----The wrong or inappropriate equipment maintenance can cause
injury or death. So:
1 The licensed people can do assembly, maintenance and some other operation.
2 The power source shall be turned off when any maintenance work in the power source needed.
3 Ensure that the cable, earth wire, connector, main lead and power supply are in the normal work.
4 Do not abuse equipments and firing.
5 Keep the safe equipment and cabinet dos shall in peace and good condition.
6 Do not change any equipment.
◆
Product Description
1.1 Produce application
MIG series welding machine adopt special tapped transformer adjusting style. It is an industrial product, it
have wire-feed system, small volume, easy to shift and simple operation, it apply to welding low-carbon steel
、
low-alloy steel and so on.
