Solution- Slightly scale back Rec. Level jog
wheel so the meter does not appear red.
Solution- Raise the Rec. Level jog wheel all the
way and lower the input gain until the signal
barely peaks and can be scaled back so it does
not appear red.
Solution- Turn the Rec. Level jog wheel all the
way up and raise the input gain until the signal
barely peaks and can be scaled back.
*Note: If your recording is not being stored cor-
rectly, you may have to raise or lower the signal
coming from your source directly if possible.
Once your bit rate format, levels and stereo/
mono settings have been made, you are ready
to record. In record mode, simply press the
2) From there slightly lower the level with the
Rec Level Jog wheel until it does not over
-
load (*Note: turning the jog wheel clockwise
raises the signal & counterclockwise lowers
the signal level).
The Input Gain switch (4) is also
used to get a maximum signal level.
The switch changes the overall level
of an incoming signal between 3
padded levels: –20 dB [-], 0 dB [o]
and +10 dB [+]. If a signal is too low,
try to raise it by switching from [-] to [o] or [o]
to [+]. If a signal is too high, try to lower it by
switching from [+] to [o] or [o] to [-].
DC INPUT
USB TO PC
Portable Guitar / Instrument Recorder
FILE
BIT RATE FORMAT
RECORD
PLAY/PAUSE
STOP/BACK
G3
TIME TUNER
FORMAT STEREO
/MONO
RECORD LEVEL/SEARCH
SD CARD
LINE IN
PHONES/
LINE OUT
MIX
ON
OFF
POWER
ON
OFF
INPUT
GAIN
-
+
-
+
0
OUTPUT
LEVEL
Pantone 419 U (black)
Pantone 188c (red)
65.0
117.0
Actual Size
fig. 1.8
Input Level
Signal Meters Output
Clipping/Distortion
Optimal Clean Recording
Clipping at Mid-Level
Low-Level Recording
Connections and System Control
Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen
20
Summary of Contents for HDR7
Page 3: ......