Step 2.8
If you want to take off the
pipe connected to the water
inlet hole, take off the blue
ring named as A(if any)first,
then press the white ring at
the outer side named as
B,and pull out the pipe
simultaneously
Step 3.
Connect to the power.
Step 4.
Press
button to turn unit on. The ice maker begins to work.
Note: For the first three cycles,the ice may be small and irregular in size,or even no ice.
Step 5.
If indicator
lights up,please take out the basket,then add water as per step 1
，
then press
to
restart the ice maker
Step 6.
If indicator
lights up,please take out the ice with the scoop.
Note: When the ice basket is full please remove the ice immediately, Do not allow
the ice collecting tray overfill.
Step 7.
Press
button to shave ice.
Note: Before the press of this button,please put enough ice into the shaved ice bowl and cover
the bowl cap well.
Step 8.
Press
button to stop the machine.
Step 9.
Put a tank in below the unit,then pull the unit a little forward, pull the drain plug at middle of the tank to
drain water.
Step 10.
If you want to take off the pipe,sketch as above,firstly take off the blue ring named as A(if any),then press
the white ring(lock) at the outer side named as B,At last take out the pipe