Operating Instructions
Step 1.
Shaved ice may melt,so it is strongly recommended that a drain hose at bottom of unit be connected.
The steps are as follows.
drain pipe
Sketch for step 1
Step 2.
Open the lid,take out of the ice basket and fill the water reservoir with water.
Note: Make sure the water is not over the bottom of the ice collecting tray.
If you prefer to fill the water automatically,then insert the water pipe into the socket at back of the unit as
below.
STEPS TO HOOK IT UP TO A TAP
Step 2.1
Insert the brackets at the
back of the machine
Step 2.2
Remove the lids on both
sides of the filter
Step 2.3
Install the filer connectors on
both sides, which should be
bound with raw tape,
otherwise it will result in
leakage