11
4.
Place each lid snap into the corresponding hook on the housing
back.
5.
Push the lid snaps towards the housing until they are flat against
the housing and the lock has engaged. Close opposing lid snaps at
the same time.
6.
Check the o-ring seal. The o-ring should form a uniform, solid line
around the back of the housing. There will be a small, even gap
around the housing between the housing back and the housing
front.
Even Gap on
All Sides
Housing Back
Main O-ring
Lid Snap
Lid Hook
Final Check
1.
Re-check the o-ring seal. The seal should form an even, solid line
around the back of the housing.
2.
Turn on the camera and check all control functions.
3.
Make sure that the camera can obtain focus and take a photo.
4.
Check battery life and open storage space on your memory card.
5.
Check the flash, if using.
