10
3.
Line the mounting screw up with the camera’s tripod socket. Use
a coin or flat head screwdriver to tighten the mounting plate to the
camera.
Camera Tripod
Socket
Mounting Screw
Mounting Plate
1/4-20 Tripod
Attachment Hole
4.
Pull out on the housing control knobs to move them out of the way.
5.
Insert the mounting plate into the slot on the inside bottom of the
housing. Push the camera all of the way forward until the back of
the mounting plate is flush with the back of the housing mount.
6.
RAISE the flash, if using! Once the camera is closed in the
housing, the flash CANNOT be raised. DO NOT raise the flash
BEFORE placing the camera in the housing.
Closing the Housing
1.
Make sure the o-ring is clean and in its proper location on the back
of the housing. The main o-ring does not require lubricant to make
a seal.
2.
Place the back onto the housing front.
3.
Make sure no controls or wires are interfering with the o-ring or the
back of the housing.
