Ikegami VFL912HD, Operation Manual

Page: 30 / 46

ENU OPERATION
7
䃂
Function escription of NU S TTING
㽲
R YPbPr
Sets “R ” when the input signal from the camera is R .
Sets “ PbPr” when the input signal from the camera is PbPr.
The factory default is “R
”.
㽳
S I INPUT
Sets O OFF of the S I input.
The factory default is “OFF”.
㽴
FRONT TA Y
Selects the brightness of the Front TA .
When “ I ” is set, it lights up brightly in conjunction with
the signal from the camera, and when “ OW”, it lights up
darkly. When “OFF” is set, it is forced to lights down the Front
TA
.
The factory default is “ OW”.
㽵
F TA Y
Selects the luminance of the F TA .
When “ I ” is set, it lights up brightly in conjunction with
the signal from the camera, and when “ OW”, it lights up
darkly.
The factory default is “ OW”.
㽶
TA Y MO E
Selects the F TA mode.
“R ” or “R R” are indicated the color of the TA , and
“-SI E” or “- AR” or “-A ” are indicated the area of the
TA display.
The factory default is “R -SI E”.
㽷
AC I T IM
Sets the luminance of the C backlight.
Setting value is 1 to 1 .
The factory default is “ ”.
㽸
ATTERY TYPE
Selects proper mode according to the mounted battery s
nominal voltage to set up the proper voltage of alarm display
and stop discharging.
Setting value is Ext. C, C 1 .
and C 1 .
䊶
Ext. C : Stable C power supply.
䊶
C 1 . : attery of “ 1 . ” for nominal voltage.
䊶
C 1 : attery of “ 1 ” for nominal voltage.
In order to get the nominal voltage of the battery, refer to the
battery body or its operation manual.
The factory default is “Ext. C”.
㽹
OOM IN ICATOR
isplays the indicator of the oom position of the camera.
The factory default is “OFF”.