Ikegami VFL912HD, Operation Manual

Page: 21 / 46

NA E and FUNCTION
6
No NAME FUNCTION
㽲
O switch
sed to change color monochrome.
㽳
R switch
sed to turn O OFF the marker.
Refer to “
䂓
isplays in the iewfinder”(P. 5) for the type of marker.
㽴
F1 switch
sed to turn O OFF the function set at E 1.
㽵
F switch
sed to turn O OFF the function set at E 1.
㽶
POWER switch
sed to turn O OFF power supply.
When power is O , the green E on the left side above this switch lights up.
When the low supply power voltage is detected, the amber E on the right side above this
switch lights up. (Only the case using external power.)
㽷
Threaded hole
sed to attach the semi-fixed hood.
㽸
E switch ainly used to control E .
㽹
RI T volume Adjust brightness of the picture. While the E lights down, it is in PRESET status.
㽺
CO T volume Adjust contrast of the picture. While the E lights down, it is in PRESET status.
㽻
PEA volume Adjust peaking amount of the picture edge. While the E lights down, it is in OFF status.
㽼
EFF led ights up when effective filter of the camera is used.
㽽
S E T led ights up when the camera is in stand-by mode and when lens extender is used.
㽾
AI led ights up when gain-up control is in progress.
㽿
AW OFF led ights up when the AW of the camera is OFF.
㾀
F TA 1 led ights up when R-TA signal is received from the camera (during recording or O AIR).
㾁
F TA led ights up when -TA signal is received from the camera.
It is possible to light up R-TA in conjunction with F TA 1.