Ikegami VFL201A, Operation Manual, Page: 28 / 42

E-18
(5) VF MENU (5/7) MARKER
＊＊＊＊ ＶＦ ＭＥＮＵ（５／７） ＊＊＊＊
ＭＡＲＫＥＲ
←（ＰＡＧＥ）→
１．ＭＡＲＫＥＲ ＯＮ／ＯＦＦ ＯＦＦ
→ＭＡＲＫＥＲ ＳＥＬＥＣＴ ＳＡＦＥＴＹ
→ＡＳＰＥＣＴ ＭＡＲＫＥＲ ４：３
→ＳＡＦＥＴＹ ＭＡＲＫＥＲ ８０％
→ＳＨＡＤＯＷ ＭＯＤＥ ＭＲＫ＋ＳＨＤ
→ＳＨＡＤＯＷ ＬＥＶＥＬ ６０％
２．ＣＥＮＴＥＲ ＭＡＲＫＥＲ ＯＦＦ
３．ＭＡＲＫＥＲ ＣＯＬＯＲ ■
４．ＭＡＲＫＥＲ ＬＥＶＥＬ １００％
ＥＸＩＴ
①
MARKER ON/OFF
Sets up ON/OFF of the Maker Display.
The default value is
“
OFF
”
.
* Setting [MARKER] on a FUNCTION switch will enable
ON/OFF switchover of MARKER.
②
MARKER SELECT
Switches over the Marker to be displayed.
The setting values that can be selected are
“
SAFETY
”
,
“
CROSS5
”
,
“
CROSS10
”
,
“
C.CROSS
”
,
“
ASPECT
”
,
“
ASP+SAFE
”
, and
“
FRM
＋
SAFE
”
.
The default value is
“
SAFETY
”
.
③
ASPECT MARKER
Switches over the Aspect of the Aspect Marker.
The setting values that can be selected are
“
4:3
”
,
“
13:9
”
,
“
14:9
”
, and
“
15:9
”
.
The default value is
“
4:3
”
.
④
SAFETY MARKER
Switches the Safety Area of the Safety Marker.
The setting values that can be selected are between
“
80%
”
and
“
100%
”
(set at the 1% increment).
The default value is
“
80%
”
.
<In the case of SAFETY MARKER Display>
<In the case of SHADOW display>
⑤
SHADOW MODE
Switches the Display mode of the Aspect Marker.
The setting values that can be selected are
“
OFF
”
,
“
SHADOW
”
, and
“
MRK+SHD
”
.
The default value is
“
MRK+SHD
”
.
SHADOW OFF MRK+SHD
①
②
③
④
⑤
⑥
⑦
⑧
⑨
SAFETY
.
C.CROSS
CROSS10 CROSS5
ASPECT ASP+SAFE
FRM+SAFE
Effective pixel area
Aspect marker
Make the setting in the range
from 80 to 100% at the 1% in-
crement.
Setting is made in the
range from 80 to 100% at
the 1% increment.