MKC-307 0710 VOL1(U)(E)
17
Setting up auto white balance
Turn the power switch to ON to bring the MKC-307 into immediate operating status.
However, auto white balance needs to be set up when MKC-307 is used for the first time, or
the light source has been changed and so forth.
<Operation>
Ԙ
Shoot a large picture of a white subject on the screen. Set the image level so that
the white subject is not too bright on the screen and press the AWB button.
ԙ
“Auto White Balance” will be displayed on the monitor screen and “OK” will appear
when auto white balance is completed.
*
“Too Dark” will be displayed if the image level’s brightness is too low.
If auto white balance completes as “NG,” check the image brightness level, etc. again
and press the white balance button again.
Auto White Balance
Auto White Balance
= O K =
White Balance Button
