MKC-307 0710 VOL1(U)(E)
16
Starting up the power
Turn ON the power to the external devices such as the monitor. Check that the CAMERA
HEAD and CCU are connected through the camera cable and then turn ON the CCU power
(POWER switch). When the CCU power is turned ON, the MKC-307 (CAMERA
HEAD+CCU) executes initialization using the built-in computer. Although a green color is
displayed on the monitor screen during this initialization, this is not a failure. The images
from the camera will be output in the same conditions in which the camera was used the last
time
1
when initialization is completed.
*
Be sure to turn OFF the POWER switch and disconnect the device from the mains supply
and connection cables for the devices when moving the main unit of this product.
Caution:
Notes on Connecting/Disconnecting the camera cable
Be sure to turn OFF the power to the main unit when
connecting or disconnecting the camera cable that connects
the camera head to the CCU.
Inserting/removing the camera cable with the main unit
power ON may lead to product failure.
1
If the power is turned OFF while in still screen status, the status will not be maintained when the power is
turned ON again and it will be set to normal shooting mode. The still image for still image mix will also be
cleared.
