Ikegami ICD-809, Instruction Manual

Page: 22 / 64

E-19
ＳＰＥＣＩＡＬ ＭＥＮＵ Ｖ１．００＊
ＣＨＲＯＭＡ Ｌ・・・・Ｉ・・・Ｈ
ＤＥＴＡＩＬ Ｌ・・・・Ｉ・・・Ｈ
ＰＥＤＥＳＴＡＬ Ｌ・・・・Ｉ・・・Ｈ
ＭＡＴＲＩＸ Ａ ＭＯＤＥ
ＭＯＮＩＴＯＲ ＣＲＴ
Ｐ．ＭＡＳＫ ＯＦＦ
ＲＳ−４８５ＩＤ ００１
ＬＡＮＧＵＡＧＥ ＥＮＧＬＩＳＨ
ＲＥＴ ＥＸＩＴ
5-4-8. MENU LOCK
To prevent un-intentional or intentional setup parameter change, this Menu Lock
function is provided for protection. The menu lock function protects saved setting
parameters against accidental or intentional alteration.
(1) To Lock
To secure the saved setting parameters to make it ON, using E button.
(2) Operation
When locked, Only EXIT is effective and all the other actions are invalid.
(3) Unlock
To un-lock, press the U, R, D, L, U, D and E buttons in this order.
If a wrong button is pressed halfway, start all over again.
5-4-9. SPECIAL MENU
(1) To go to the Special Menu, push L and
R buttons together at the SET UP
position.
The SPECIAL MENU screen shows up,
as shown on right.
(2) CHROMA
With the L and R buttons, the chroma
level can be adjusted. Make the
adjustment to your desired level while
watching a monitor screen.
(3) DETAIL
With the L and R buttons, the detail level can be adjusted. Make the adjustment
to your desired level while watching a monitor screen.
(4) PEDESTAL
By L and R buttons, the pedestal level can be adjusted. Make this adjustment
to your desired level while watching a monitor screen.
(5) MATRIX
Can select Matrix Modes, A or B. In normal condition, the A mode is
recommendable, but special cases such as under florescent lightings, or in-
door situation, the B mode is possibly better for optimum picture
(6) MONITOR
By L or R button, picture reproduction mode of monitor can be selected.
①
CRT is for Cathode Ray Tube (Braun Tube) type monitors.
②
LCD is for FDP, Flat Display Panel type monitors, such as LCD or Plasma.