Ikegami HQLM-1720WR Operation Manual Download Page 28

Page: 28 / 82

HQLM-1720WR

- -

࣭

MODE5 (1357-2468)

࣭

MODE6 (1234-5678)

MODE7 (1357-8642)
MODE8 (12-34)

㸸

During the display mode 1-2ch

and

1-4ch

settings.

MODE8 (1234-5678)

㸸

During the display mode

1-8ch

settings.

* The display of MODE 4 varies depending on

the number of channels for the section

࣭

Default setting is 1(1357-2468).

Setting the channel display of the audio level

meter

࣭

The display channel of the audio level meter is

set. Within embedded audio 16 channels, up to 8
channels are allocated as follows.

࣭

㸫

㸸

CH1 to CH2 is displayed.

࣭

㸫

㸸

CH1 to CH4 is displayed.

࣭

㸫

㸸

CH1 to CH8 is displayed.

࣭

㸫

㸸

CH1 to CH2 is displayed.

࣭

㸫

㸸

CH1 to CH4 is displayed.

࣭

㸫

㸸

CH1 to CH8 is displayed.

࣭

Default setting is CH 1-8.

Setting the brightness of the audio level meter

࣭

Set the brightness of the audio level meter.

࣭

The level meter image transmissive mode or

nontransmissive mode can be set.

࣭

LOW

࣭

MID

࣭

HIGH

࣭

LOW (MIX) (Image transmissive mode)

࣭

MID (MIX) (Image transmissive mode)

࣭

HIGH (MIX) (Image transmissive mode)

࣭

Default setting is HIGH.

Setting the peak hold display of the audio level

meter

࣭

Used to turn on and off the peak hold display.

࣭

Default setting is ON.

Setting the reference level

࣭

Set the reference level of the audio level meter.

࣭

-18dBFS

࣭

-20dBFS

࣭

Default setting is -20dBFS

Downmix setting

࣭

Set the 5.1 channel surround downmix.

࣭

Mix the 5.1 channel surround audio signal as-

signed to 6 channels of embedded audio into 2
channels, and output to the speaker, the head-
phone and the audio monitor output.

࣭

5.1ch surround sub woofer(LFE) channel is not

mixed.

Setting the downmix formats

࣭

Select the mixing method to downmix 5.1ch audio

in “ISO/IEC” and “ARIB”.

࣭

Default setting is ISO/IEC

Setting the Ls/Rs level

࣭

Set the coefficient of Ls/Rs to mix.

࣭

Set among -3dB/-6dB/-9dB/OFF.

(OFF

㸻

㸫҄

)

࣭

Default setting is

㸫

3dB

Setting the embedded audio channel assign-

ment of speaker (Lm)

࣭

Set which embedded audio channel is allocated to

the 5.1-ch surround Lm speaker (left side in
front).

࣭

Default setting is CH1

Setting the embedded audio channel assign-

ment of speaker (Rm)

࣭

Set which embedded audio channel is allocated to

the 5.1-ch surround Rm speaker (right side in
front).

࣭

Default setting is CH2

㻯㻴㻌㻝
㻯㻴㻌㻟
㻯㻴㻌㻡
㻯㻴㻌㻣㻌

㻯㻴㻌㻞

㻯㻴㻌㻠
㻯㻴㻌㻢
㻯㻴㻌㻤㻌

㻹㻻㻰㻱㻌㻡

㻯㻴㻌㻝㻘㻞㻘㻟㻘㻠

㻯㻴㻌㻡㻘㻢㻘㻣㻘㻤

㻯㻴㻌㻝㻘㻟㻘㻡㻘㻣

㻯㻴㻌㻤㻘㻢㻘㻠㻘㻞

㻹㻻㻰㻱㻌㻢

㻹㻻㻰㻱㻌㻣

㻯㻴㻌㻝㻘㻞

㻹㻻㻰㻱㻌㻤㻌㻔㻠㼏㼔㻕

㻯㻴㻌㻟㻘㻠

㻹㻻㻰㻱㻌㻤㻌㻔㻤㼏㼔㻕

㻯㻴㻌㻝㻘㻞㻘㻟㻘㻠

㻯㻴㻌㻡㻘㻢㻘㻣㻘㻤

㻹㻻㻰㻱㻌㻢䚸㻣䚸㻤

Summary of Contents for HQLM-1720WR


















































































Search results

Summary of Contents for HQLM-1720WR

Reviews:

Brands by name

Popular brands

Ikegami HQLM-1720WR, Operation Manual

Search results

Summary of Contents for HQLM-1720WR

Reviews:

Brands by name

Popular brands