Ikegami HQLM-1720WR Operation Manual Download Page 17

Page: 17 / 82

HQLM-1720WR

- 7 -

2-2

㸬

Rear panel (left)

㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌

㻌

AC power input

࣭

Insert an AC cable here to supply AC power.

Lock

࣭

After inserting an AC plug, lock the AC plug

with this lock to prevent it from disconnecting.

MAIN POWER switch

࣭

Turns on/off the AC power supply to the monitor.

࣭

To operate the monitor, turn ON this MAIN-

POWER switch as well as the POWER switch

on the front panel.

Fan1/2

ዘ

When power is turned on, the fan starts running
for the operational check. Then, it automatically
operates according to the internal temperature.

ዘ

When the fan does not start operating even the
set temperature to start fan operation is reached,
the following message is displayed on the screen.

FAN1 ERROR! : FAN on the left side as seen

from

the

back

FAN2 ERROR! : FAN on the right side as seen

from

the

back

Handle

(option)

࣭

This is an optional handle dedicated for this sys-

tem.

࣭

For details, refer to “10.2 Fixed stand STD-1720

(option) and handle GR-1720 (option).”

VESA

Mount

ዘ

VESA mount of “100 x 100mm” or “200 x 100mm”

can be installed here.

)L[HGVWDQG

(option)

࣭

This is an optional stand dedicated for this sys-

tem.

࣭

For details, refer to “10.2 Fixed stand STD-1720

(option) and handle GR-1720 (option).”.

PRECAUTION

࣭

Connect the power cord included with this unit to a

3-pin outlet with ground terminal.

㻼㻻㼃㻱㻾

㻭㻯㻌㻵㻺

㻝㻜㻜㻙㻝㻞㻜㼂

㻞㻜㻜㻙㻞㻠㻜㼂

䐠㻌

䐟㻌

䐡㻌

䐢䠄㻲㻭㻺㻝䠅㻌

䐢㻔㻲㻭㻺㻞㻕㻌

䐣㻌

䐤㻌

䐥㻌

Summary of Contents for HQLM-1720WR


















































































Search results

Summary of Contents for HQLM-1720WR

Reviews:

Brands by name

Popular brands

Ikegami HQLM-1720WR, Operation Manual

Search results

Summary of Contents for HQLM-1720WR

Reviews:

Brands by name

Popular brands