Ikegami HLM-1705WR, Operation Manual

Page: 8 / 82

9. Caution for condensing.
When the monitor is used in the condition where temperature abruptly changes, the surface of
outside and the inside of monitor are possible to get condensed.
And if it is used leaving condensed, it can cause deterioration of quality and trouble.
If the device is condensed, please do not turn on the power until waterdrop is disappeared
completely.
10. Avoid operation or storage in a place exposed to corrosive gas.
Operation or storage in a place where any corrosive gas such as sulfur dioxide, hydrogen sulfide,
chlorine or ammonia is generated may lead to a significant reduction in the monitor service life.
It may also cause failure or electric leakage.
Also avoid using the monitor in a location exposed to high salty wind.
11. Do not use this monitor for such applications as space appliance, nuclear control system as
any medical equipment involving human life.
12. Considerations when storing the monitor in a hard carrying case.
The LCD panel used for this monitor has a very delicate structure that is composed of multiple
layers of expensive films. Therefore, the following considerations must be taken into account
when storing the monitor in a hard case.
࣭
If the monitor that has been stored at low temperature for a long time is suddenly exposed to
high temperature environment, dew condensation may occur. When you store the monitor in
the case for a long time, m
make sure to store at a temperature near room temperature and
avoid a sudden temperature change when taking out the monitor from the case.
࣭
If you are planning to store the monitor in the case for a long time, make sure to rreplace silica
gels, etc. in a regular basis and store the monitor at proper humidity as the humidity in the
case can cause corrosion.
࣭
If the monitor is stored in the case with water droplets or condensation for a long time, the
humidity stays in the case and can cause corrosion. M Make sure to allow the monitor to dry well
before storing in the case.
Quality of LCD panel
Note that because the LCD panel mounted on the monitor is manufactured through the use of
high-precision technology, 99.99% or more of the pixels are effective, but 0.01% or less of them
may be lacking in brightness or lit up constantly.
Internal fan
The internal fan does not run constantly but automatically starts running when the internal
temperature of the monitor rises. When the environmental temperature is low, the internal fan
may not be running, which indicates no fault condition.
At power-on, the fan rotates for a moment for checking its own performance.
In the case of outdoor use, even if the ambient temperature is low, the fan may start running
when the internal temperature of the monitor rises.
Suppose that the fan does not operate properly at power-on or at high temperatures. In such
case, the message "FAN ERROR!" will appear at the top of the screen.
The brightness of the backlight may be reduced in order to keep the internal temperature of the
motor from rising.
If the message "FAN ERROR!" is displayed, contact your dealer or Ikegami service desk.