Ikegami HLM-1705WR Page 68 Operation Manual Download

Page: 68 / 82

- 58 -

6-2

㸬

Basic procedures on the MENU and PRESET MENU screens

Basic mouse behavior on the MENU screen

࣭

Left-click the mouse to go to the right of the

MENU screen and select an item. Right-click it
to return to the left-hand items.

࣭

The scroll wheel is used to move vertically and to
change the settings.

࣭

When there are two or more settings to select on

the right-hand data like the USB memory’s date
setting, left-click the mouse to go to the settings
to modify.

Basic mouse behavior on the PRESET MENU

screen

࣭

The behavior is the same as Item

Basic mouse behavior on the CHANGE PRE-

SET screen

࣭

The behavior is the same as Item

Basic mouse behavior on the USER MARKER

screen

࣭

The behavior is the same as Item

Summary of Contents for HLM-1705WR



















































































Search results

Summary of Contents for HLM-1705WR

Reviews:

Related manuals for HLM-1705WR

Brands by name

Popular brands

Ikegami HLM-1705WR, Operation Manual

Search results

Summary of Contents for HLM-1705WR

Reviews:

Related manuals for HLM-1705WR

Brands by name

Popular brands