Ikegami HLM-1705WR, Operation Manual

Page: 43 / 82

- - 33
յ
User marker coordinates
࣭
In the
͆
DATA (X Y)
͇
column, the coordinates for
S
㸸
START POINT and E
㸸
END POINT of the
currently set user markers are displayed. with-
out such settings, the
͇͆̾
marker appears.
࣭
Move the cursor to the X/Y data. Using the ENT
switch, new user markers can be drawn or al-
ready registered user markers can be modified.
࣭
The setting can be made in 1-pixel increments.
The top left of the effective screen serves as the
reference point (0001, 0001) of the coordinates.
From this point, the coordinates can be adjusted
in the pixel range of 1920 x 1080.
࣭
Default setting is
̾
(unregistered).
ە
Resetting the data
࣭
With the
͆
DATA (X Y)
͇
settings blinking in
magenta, hold down the switch (or the
right-hand button on the mouse) longer than 3
seconds, and the preset data may be deleted (
̾
).
ە
Coordinate reference point
This 1920 x 1080, Full-HD panel has the pixel
reference point (0001, 0001) at the top left of the
screen. The pixel at the bottom right on screen is
preset as the coordinates (1920, 1080).
ە
Marker lines and coordinate values
There are 2 line widths for the user markers.
However, the coordinate for the start point and
that for the end point are different by 1 pixel.
Accordingly, in drawing a horizontal line, the
Y-direction address has a coordinate value with
1 pixel added, as shown below.
When a vertical line is drawn, the X-axis address
has a coordinate value with 1 pixel added, as
shown below.
㻔㻜㻜㻜㻝㻌㻘㻜㻜㻜㻝㻕㻌
㻔㻜㻜㻜㻝㻌㻘㻝㻜㻤㻜㻕㻌
㻔㻝㻥㻞㻜㻌㻘㻝㻜㻤㻜㻕㻌
㻔㻝㻥㻞㻜㻌㻘㻜㻜㻜㻝㻕㻌
Y axis
X axis
ࠕࢫࢱ࣮ࢺ࣏࢖ࣥࢺࠖࡀ♧ࡍᗙᶆࡢࣆࢡࢭࣝ఩⨨㸦㹖ࠊ㹗㸧
ࠕ࢚ࣥࢻ࣏࢖ࣥࢺࠖࡀ♧ࡍᗙᶆࡢࣆࢡࢭࣝ఩⨨㸦㹖ࠊ㹗㹟㸧
ࠉ㹟
Pixel position (X+a, Y+1) in the coordinate for the
"end point"
Pixel position (X, Y) in the coordinate for the
"start point"
ࠕࢫࢱ࣮ࢺ࣏࢖ࣥࢺࠖࡀ♧ࡍᗙᶆࡢࣆࢡࢭࣝ఩⨨㸦㹖ࠊ㹗㸧
ࠕ࢚ࣥࢻ࣏࢖ࣥࢺࠖࡀ♧ࡍᗙᶆࡢࣆࢡࢭࣝ఩⨨㸦㹖㹟ࠊ㹗㸧
ࠉ㹟
Pixel position (X+a, Y+1) in the coordinate for the "end point"
Pixel position (X, Y) in the coordinate for the "start point"
ࣛ࢖ࣥᖜ㸸ࣆࢡࢭࣝ
ࠕࢫࢱ࣮ࢺ࣏࢖ࣥࢺࠖࡀ♧ࡍᗙᶆࡢࣆࢡࢭࣝ఩⨨
ࠕ࢚ࣥࢻ࣏࢖ࣥࢺࠖࡀ♧ࡍᗙᶆࡢࣆࢡࢭࣝ఩⨨
Pixel position in the coordinate for the "end point"
Pixel position in the coordinate for the "start point"
Line width: 2 pixels