IKEA VILLKORLIG 404.621.69, Manual

Page: 19 / 68

19
EN
TROUBLESHOOTING
CAUTION
• If overflow occurs, turn off the main water supply before calling a service
provider.
• If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
PROBLEM POSSIBLE CAUSES SOLUTIONS
Stained tub
interior
• Coffee and tea soil.
• Reddish stain.
• Using an approved spot cleaner to
remove the soil.
• Some tomato-based foods will
cause this, use of the rinse only
cycle right after loading this will
decrease the staining.
Noises • Detergent cup
opening\
Drain pump sound.
• A hard object has
entered the wash
module. When the
object is ground up,
the sound should
stop.
• This is normal.
• If the noise persists after a
complete cycle, call for service.X
Dishwasher won’t
fill with water
• Water valve is turn
off.
• Door latch may not
be properly seated.
• Check if the water valve is turn on.
• Make sure the door is closed.
Error codes
Error codes will display on the display window when the following errors occur:
CODE MEANING POSSIBLE CAUSES
i1 Longer inlet time Faucets is not opened, or water intake
is restricted, or water pressure is too
low.
i4 Unit leaking Some element of dishwasher leaks.
id PCB communication
error
PCB issue, or wire connected to the
board issue.