IKEA VILLKORLIG 404.621.69, Manual

Page: 18 / 68

18
EN
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES SOLUTIONS
Dishes not
dry enough
• Rinse aid dispenser
is empty.
• Improper loading of
dishes.
• The cycle you chose
did not included the
drying.
• Fill rinse aid dispenser or increase
the amount of rinse aid.
• Load the dishes again as the
manual instructs.
• Choose the proper cycle with
drying.
Spots and film on
dishes
• Water hardness is
too high.
• Improper loading of
dishes.
• Old rinse aid is
used.
• Rinse dispenser
empty.
• For extremely hard water install a
water softener.
• Load the dishes again as the
manual indicates.
• Use fresh rinse aid.
• Add rinse aid to the dispenser.
Etching • Using too much
detergent.
• The inlet water
temperature
exceeds 158°F
(70°C).
• Use less detergent if you have soft
water.
• Lower the inlet water temperature.
Detergent left in
dispenser
cup
• Detergent may be
too old.
• Spray arm is
blocked.
• Use fresh detergent.
•
Load the dishes, making sure the
spray arms are not blocked.
Detergent
dispenser will not
shut
• Improper operation
of the detergent
cover.
• Add the detergent and rinse aid as
indicated by the manual.
Water remains in
the dishwasher
• Previous cycle has
not finished or has
been interrupted.
• Select the proper cycle explained
in the manual.
Dishwasher
does not drain
properly
• Drain is clogged.
• Drain hose is
kinked.
• Check the air gap if you have one.
Make sure the disposer is empty
if dishwasher is connected to
disposer.
• Make sure the drain hose is
properly connected to the sink.
Suds in the tub • Improper detergent
is used.
• Make sure to use only the
automatic dishwasher detergent.
Dishwasher leaks • Excessive suds
caused by using
the improper
detergent.
• Dishwasher is not
level.
• Make sure to use only the proper
dishwasher detergent.
• Level the dishwasher.
Black or gray
marks on dishes
• Aluminum utensils
have rubbed
against dishes.
• Rearrange the dishes.