IKEA RODULF, Manual

Page: 9 / 12

9
To access full stroke
• Release the down button at the lowest safe point
and then press the down button again for 5
seconds. The desk will move to the mechanical
lowest height to have full stroke access.
Simple memory
To set memory/end positions:
• Move your desk to the level you want to store.
• Press both buttons three times (0.5-1 second
between each press).
• Then press "up" or "down" to set the position
(0.5-1 second).
• Do the same for your second stored setting.
Collision detection
• The system is designed to avoid possible
damages to equipment due to collision.
When desk detects a sudden change in
resistance it will stop the movement and reverse
approximately 50mm. 25mm of travel to activate
in both direction.
Safety regulations
• When the desk is run up/down, keep the
necessary safety distance to avoid being trapped
between the moving desk top and fixed objects in
the surrounding area.
• When the desk is run up/down the user should
keep watch so that nobody is injured or no object
is damaged. The desk top must not bump into
a fixed object in case it overturns. Remove any
office chair before the desk is run up/down, each
time.
• The desk legs must not be altered or
reconstructed in any way. During service and
repair work of the desk, the electrical cable must
always be disconnected from the wall socket.
• Modifications to the legs are absolutely
prohibited.
• The desk must not be used as a hoisting device
for people.
Maintenance and repair instructions
After approximately 1 week of use, check that the
screws are properly tightened.
• If the desk cannot be lowered or raised, check the
connections between the control box and the wall
socket.
• If any part of the electrical system is to be
replaced, the electrical cable must first be
disconnected from the wall socket.
Replace the electrical part and then reconnect the
electrical cable to the wall socket. The desk is now
ready for use.
If the desk still does not work, please contact your
nearest IKEA store or customer service.
Product servicing
Do not attempt to repair this product yourself, as
opening or removing covers may expose you to
dangerous voltages or other risks.
EU Declaration of Conformity
EU Declaration of Conformity is included in the
packaging as a separate document.
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
Telephone no.: +46(0)476-648500
SAVE THESE INSTRUCTIONS