10
Technical data
Model name
RODULF si/st desk 140x80
Type number
RODULF-GF-470
Input
100–240 V AC, 50/60 Hz, 3.2–1.5 A
Standby power consumption
<0.1 W
Temperature interval at usage:
50–104 °F or 10–40 °C.
Temperature interval at storage:
0–158 °F or -18–70 °C
Operating humidity
20–90 % RH at 104 °F or 40 °C
Sound level:
<50 dB(A)
Height setting interval:
68–115 cm or 26.8–45.3 inches
Maximum load:
80 kg or 176 lb
Trouble shooting guide
NOTE!
Do always disconnect the cable from the wall socket before maintenance!
Symptom
Check
Try
The desk does not move.
Make sure that all cable are
connected.
Connect the cables.
Follow installation instructions
and perform a reset.
Unplug the desk from the wall
socket for roughly 1 minute and
reconnect.
Only one column is moving.
Perform a reset. If there’s still
only one column moving, replace
the column that is not moving.
The columns are moving at
different speeds.
It is possible to move the slower
column by pulling/pushing.
Replace the column that is
moving slower.
It is not possible to move the
slower column by pulling/
pushing.
Replace the column that is
moving faster.
The desk only moves short
distances.
Make sure that the desk is not
overloaded.
Unload the desk. If the problem
remains, replace the control box.
The desk stops and reverse
during operation.
Make sure that nothing is
blocking the desk movement.
Remove the obstacle. If the
problem remains replace the
whole underframe.
The desk is not able to drive all
the way up or all the way down.
Check all connections.
Perform a reset.
The desk can only drive in one
direction (up or down).
The desk is not horizontal.
Summary of Contents for RODULF
