5
EN
Your dishwasher cleans by spraying a mixture of hot water and detergent through the
spray arms against soiled surfaces. First, the dishwasher drains for a few seconds to
remove soils dropped while loading, then fills with water covering the filter area. Water is
then pumped through the spray arms. Soil particles go through and across the filter and
down the drain as the water is pumped out. This series of steps are repeated as needed.
The number of water fills varies with the cycle being used.
Getting Started
1.
Load Dishwasher (See Preparing and Loading Dishes).
2.
Add detergent (See Dishwasher Dispenser & Detergents).
3.
Add Rinse Aid, if needed (See Rinse Aid).
4.
Run hot water faucet nearest dishwasher until water is hot. Turn water off.
5.
Select desired CYCLE (See Cycle Chart).
6.
Select desired OPTION (See Option Selections).
7. To start, press START button and close door immediately.
Features may vary according to model.
Rinse Aid
Dispenser
Tub Gasket
Middle Spray
Arm
Lower
Rack
Lower Spray
Arm
Detergent
Dispenser
Spray Arm
Upper Rack
Silverware
Basket
Filter
Serial Label
(located on
right side of
door)
Third level rack
FEATURES
