IKEA FULLSTANDIG, Manual

Page: 10 / 48

10 ENGLISH
Before contacting the Authorized Service
Centre:
Switch the appliance on again to see if the
problem has disappeared. If not, switch it off
again and repeat the operation after an hour.
If your appliance still does not work properly
after carrying out the checks listed in the
troubleshooting guide and switching the
appliance on again, contact the Authorized
Service Centre, clearly explaining the problem
Problem Possible cause Solution
The appliance does not
work
There is no mains
electrical power
Check for the presence of mains electrical
power.
Turn off the appliance and restart it to see
if the faults persists.
The appliance is not
connected to the electrical
supply
Check if the appliance is connected to the
electrical supply.
Turn off the appliance and restart it to see
if the faults persists.
The hood’s suction level is
not enough
The suction speed is too
low
Check the suction speed and adjust as
necessary.
The grease filters are
dirty 4
Check that the filters are clean
If not, clean the filters in the dishwasher.
The anti-odors filters are
dirty
Check that the anti-odour filters are
properly washed as recommended
The air vents ar e
obstructed
Check the air vents for any obstructions
and remove as necessary.
The light does not work The LED is broken 2 For replacement, contact the Authorized
Service Centre.
and specifying:
• the type of fault;
• the model;
• the type and serial number of the appliance
(given on the rating plate);
• the Service number (the number after the
word SERVICE on the rating plate inside the
appliance).
What to do if ...