IKEA 004.672.96, Manual

Page: 13 / 104

13 ENGLISH
Power limitation
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
When first connecting to the domestic power supply, the installer must set the power of the hob cooking areas
based on the actual abilities and capacity of the power supply itself.
If this is not necessary, the hob can be turned on directly using
, otherwise, follow the operations below to
access the menu.
Connect the hob to the domestic mains power
1.
All the digits light up for a few seconds, than they go out only the
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
remains flashing.
2. Press and hold the
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
and digits of the zones show .
3. Holding
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
start pressing the zones digitis in anticlock direction, starting from the bottom right.
1
2
4
3
The back right hand digit shows and a number indicating the type of menu. The front right hand digit
shows a number that depends on the parameters indicated in the selection.
Select the digit with and press “ 8 “ on the power bar.
Select the other digit and select the correct setting.
See the table below for the specifications:
Value on the
power bar
Kw Notes
0 7.4 Kw Standard initial setting
1 6 Kw
2 5 Kw
3 4 Kw
4 3.5 Kw
5 3 Kw
6 2.5 Kw
Once the correct value has been entered, confirm by pressing and holding .