Licensing and Trade Mark
Beholder
®
is the licensed trademark of TRD Beholder.
Website: http://www.teamrebeldesign.com/
Email: [email protected]
7
©
2015 Beholder All Rights Reserved
Attention
A. It need you Gyro Calibration if your MS1 Automatic movement or
unbalance. Gyro calibration: Place the MS1 on a flat surface. Make
sure the camera is balanced in the gimbal. Press and hold the joystick
in for 3 sec. If balance is not correct try again calibrating. Keep the
MS1 steady on the table during the calibration process and prevent
any movement or vibration.
B. USB Ports:
The USB located on the handle is a 5V 0.5A power output.
The Micro USB located on the handle is for remote control.
The Mini USB located on the gimbal is for accessing the 8- Bit board
PID settings through Simple BGC 8- Bit 2.40b7.
