Camera Setup and Balancing
1. Attach the quick release plate as
shown with the longest slide pointing
out towards the direction of the lens.
Snuggly tighten the camera screw.
4. Adjust the front and rear balance.
Once gimbal is balanced, tighten
the quick release lock. If the camera
does not balance perfectly, don’t
worry the MS1 will usually be able to
maintain stability.
4
©
2015 Beholder All Rights Reserved
2. Attach the camera with plate to
stabilizer. Adjust the camera’s
position so that the gimbal remains
level.
3. Adjust the left-right balance of the
camera. Small adjustments maybe
needed.
