5
2016 Beholder
®
All Right Reserved
Battery charging and inserting
For best performance, please use ikan IB-‐18650-‐26 batteries. The LED indicator will turn red while
charging and green if the batteries are fully charged.
Connect the battery holder (Fig. 1) to the USB power supply before the batteries are installed in
the holder. The LED will turn green to indicate the USB power can be used. Disconnect the battery holder
and insert the three batteries. Connect the battery holder to the charger again. The LED indicator will turn
red to indicate the batteries have started to charge. If less than three batteries are placed in the battery
holder, the indicator light displays green to indicate that charging has not started. The battery holder can
only charge all three batteries at once.
Note: The battery holder can only be used as a charger stand temporarily. When the battery LED
indicator turns green to indicate the completion of charging, the batteries are only charged to 80% of the
battery capacity. For 100% charge, please buy a professional charge adapter or use ikan’s ICH-‐ SC4 smart
charger.
The battery holder charge time is 3-‐4 hours.
Charging the Batteries
▲
WARNING
When using the battery holder as a charger, the USB power supply must meet the minimum
requirements.
The common USB port may not supply enough power to charge the batteries. A USB adapter rated at a
minimum of 2.5A/12.5W or more may be needed.
