11
2016 Beholder
®
All Right Reserved
Recommendations
•
After adjusting the camera installation, check that each knob is fully tightened.
•
Do not overtighten the screw wrench to avoid stripping the screw.
•
For very small cameras and lenses, if you cannot reach the balance as per the steps above, replace
the camera or lens.
TIP
•
Before starting the gimbal, make sure the camera is properly mounted on the stabilizer and
perfectly balanced.
•
Beholder MS-‐PRO uses the latest 32-‐bit systems, a multi-‐processor technology and inductive motor
technology, with greatly improved torque. Therefore, it's able to start and level the camera if it is out
of balance, but for shot stability, battery life and power saving, we strongly recommend you find the
best balance first and then power the gimbal on and shoot the video.
