3
2016 Beholder
®
All Right Reserved
The Beholder MS-‐PRO is the newest upgrade to the popular Beholder MS1 gimbal. It is a three-‐axis
gyro-‐stabilizer with an encoder motor and a 32-‐bit control board. The MS-‐PRO is compatible with most mirrorless
cameras weighing less than 900 grams, including other small cameras, cell phones, and GoPro cameras.
Whether filming fast-‐paced actions or aiming for high or low-‐angle shots, this device will help you correct shakes
or swaying and will balance and smooth the picture in order to achieve professional grade image stabilization.
The MS-‐PRO uses a 32-‐bit system, which has a variety of shooting modes through the mode selection button.
The 32-‐bit encoder system allows the MS-‐PRO to respond more quickly. By having an encoder with the motor, the
gimbal is more stable, and more accurate than ever before.
The Gimbal can be turned on with a camera at any angle. By manually holding the camera at a certain position,
the gimbal will hold the camera at the held position and support angled shots. The gimbal supports the camera in all
360 degrees while maintaining great stability, supports flip screen cameras, and has provisions for an external
remote control (wired or wireless remote control).
By attaching a monopod to the gimbal, you can simulate a drone shot, low and high follow shots, dolly shot, and
many other different angles. It reduces any types of jitter from the footage. The Beholder MS-‐PRO includes a USB
port to allow for easy firmware and software upgrades.
The MS-‐PRO has 20 hours of standby time, with an OLED display that shows the current battery level. Users can
better understand the battery level, charge the battery on time, and eliminate sudden low battery situations. The
OLED screen can also display the current switch mode in real time so that users can know the current shooting
mode.
About the MS-‐PRO
▲
To reduce fire or shock hazard, do not expose the unit to rain or moisture
.
WARNING
