21
Ö
Then, the system check screen will be displayed for several seconds.
Symbols are shown on the screen, including the working mode set-
ting, the target speed, the maximum rotation speed (rpm) and timer
maximum value etc. of the device.
Factory setting
The device is supplied with following factory setting:
Menu Settings:
mode
A
max rpm
6000
rpm
timer max
30
minute
language
English
Working Setting:
target rpm
400
rpm
timer sec
off
rev sec
off
10
Resetting parameters to factory setting
10.1
To reset the parameters to the factory settings, proceed as following:
• Pull out main plug from the device.
• Hold the controller buttons “Menu/Back” and “Timer” simultane-
ously and re-insert main plug in power outlet.
• The unit is now reset to the factory settings.
c
g
d
e
f
h
Symbols Explanation
c
Maximum rotation speed of the device (If “Turbo” function is
activated, the maximum rotation speed could reach 8000 rpm).
d
Rotation symbol (The symbol will change into
3
or
4
if “Rev”
function is activated).
e
Rotation speed setting.
f
Operation mode.
g
“Timer” maximum value of the device.
h
“Timer” symbol.
Ö
After the system check screen, the working screen will appear
and the device is ready for operation.
Note:
Figure above shows specified values corresponding to the
default settings at delivery.
