7
0 mm
!
!
Securing the extension arm to the disperser:
Securing
Open the turning knob so that the thread does not protrude
into the hole.
Insert the dispersion tool from the bottom into the drive
unit as far as the stop. The shaft tube will audibly click into
place when a small amount of force is applied.
The dispersion tool is fitted correctly when the marking on
the dispersing element is aligned with the bottom edge of
the drive unit.
Now secure the dispersion tool by screwing the turning
knob tightly.
Ensure that the extension arm is fitted securely.
Vibration may cause the screw to become loose. It is there-
fore necessary for safe use to regularly check that the exten-
sion arm is attached securely. Tighten the hexangular bolt
as required.
Securing the disperser to the stand:
Check that the disperser is held in position firmly prior to
each use and also at regular intervals. The position of the
disperser must only be adjusted when the equipment is sta-
tionary and the power supply is disconnected.
Securing the dispersion tool:
Securing the dispersing vessel to the stand:
Disperser
Extension arm
Hexagonal socket
screw
Hexagon socket
offset screw key
Stand
Screw bolt
Cross sleeve
Extension
arm
Vessel
Stand
Strap clamp
Clamping bolt
Clamping
band
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Drive unit
Turning knob
Dispersion tool
