25
/// Assemble the stand pole RV 3�1 (Accessories)
Assemble the condenser locking device according to the diagram�
�
Mount the plate (
A
) using the thumb screw (
B
)�
�
Put the support rod (
D
) on the plate (
A
) and attach it with the screw nut (
C
)�
�
Attach the rubber protector (
E
)�
�
Fasten the Velcro
®
band (
F
) to the support rod (
D
)�
�
Secure the vertical glassware with the Velcro
®
band (
F
)�
No stand is required if the condenser has been properly fitted and secured by tightening the
condenser union nut on the rotary drive�
The purpose of the stand is solely to prevent the condenser from twisting�
Notice:
If the stand is fitted incorrectly, the strong forces at the Velcro strap can cause stresses within
the glass, which in turn can cause damage to the glass condenser�
After the condenser has been fitted, the stand is attached to the rotary drive� Make sure that
the condenser is installed parallel to the lift body�
E
F
C
D
B
A
1.
2.
3.
4.
5.
Summary of Contents for RV 3 eco
