11
max. 10˚
Moving the device:
Empty all fluid in the bath before moving device from one
place to other place�
The device must be lifted by two persons with the upper
handles�
It can also be moved on flat surface by lifting and pushing
the front of the device� It is easy to move the device with
the help of the wheels�
The angle of inclination should never be more than 10 º at
any direction when move the device!
Note:
The device must not be moved during operation�
After moving the device, you must wait at least one hour
before restarting the unit�
Fig. 9
Operator panel and display
Item Designation
Function
A
On/Off button:
Switch on/off the circulator�
B
LED, set:
The LED lights up at the same time as the set value is displayed�
C
LED, cooling:
The light LED indicate the refrigerating function is activated�
D
LED display:
Display the settings and actual values�
E
“Menu” button:
Press it once: menu option is display�
Press it once again: back to working screen�
F
LED, lock:
Indicate the buttons are deactivated�
G
Lock button:
Lock/unlock buttons�
H
“OK/Pump” button:
Start/stop the pump function�
Confirm the menu options�
I
“Pump (+)” button:
Increase the pump speed setting�
Change the menu value setting�
J
“Pump (-)” button:
Decrease the pump speed setting�
Change the menu value setting�
K
“Temp” button:
Start/stop the refrigerating function�
L
“Temp (+)” button:
Increase the temperature setting�
Navigation, selecting the settings in the menu�
M
“Temp (-)” button:
Decrease the temperature setting�
Navigation, selecting the settings in the menu�
N
Fluid level indicator:
Indicate the fluid level (when the fluid level is too low or too high, the bottom or
the top LED segment change into red color)�
A
K
I
J
E
G
H
L
M
D
C
F
B
Fig. 10
N
