IKA RC 2 lite Manual Download Page 6

10

11

Intended use

///

 

Use

Use 

RC 2 lite

 for tempering and circulating fluids�

Intended use:

 

Tabletop device

Unpacking

›  Please unpack the device carefully�
›  Any damage should be notified immediately to the shipping agent (post office, railway 

network or logistics company)�

1

RC 2 lite

2

Power cord set

3

USB cable

4

Hexagon socket offset screw key

5

Hose olives NW 8 (2 x)

6

User guide

7

Warranty card

IKA

 RC

 2 l

ite

Gar

ant

y

1+2+3

1

2

6

7

5

4

3

/// Refrigerant

 Warning!

›  The device is not allowed to be used in an ATEX (Atmosphere Exlosible) zone�
›  Flammable refrigerant used� Do not use mechanical devices or other means to accelerate the 

defrosting process, other than those recommended by the manufacturer�

›  Do not damage the refrigerant circuit�

›  Insufficient ventilation may result in the formation of explosive mixtures� Only use the device 

in well ventilated areas and keep all air vents open�

›  Flammable refrigerant used� Only the manufacturer may open and repair the closed refrigeration 

system� 

›  The minimum room size is 9 m³, so that in the event of an error (exit of the complete refrigerant 

filling quantity) no flammable refrigerant-air mixture can arise (R 290 max� 8 g/m³ ambient air)�

/// Range of use 

Indoor environments similar to that a laboratory of research, teaching, trade or industry�

The safety of the user cannot be guaranteed:
›  if the device is operated with accessories that are not supplied or recommended by the 

manufacturer�

›  if the device is operated improperly or contrary to the manufacture’s specifications�
›  if the device or the printed circuit board are modified by third parties�

Summary of Contents for RC 2 lite



















Reviews: