IKA RC 2 lite, Manual, Page: 4 / 18

6 7
EU Declaration of conformity
Source language: German
Explication of warning symbols
/// Warning symbols
Indicates an (extremely) hazardous situation, which, if not avoided, will
result in death, serious injury�
Danger!
Indicates a hazardous situation, which, if not avoided, can result in
death, serious injury�
Warning!
Indicates a potentially hazardous situation, which, if not avoided, can
result in injury�
Caution!
!
Indicates practices which, if not avoided, can result in equipment damage�
Notice!
/// General Symbols
Position number
A–––
Correct / Result
Shows the correct execution or the result of an action step�
Wrong
Shows the incorrect execution of an action step�
Note
Displays action steps that require particular attention to detail�
/// Device setup
Caution!
› The power switch of the device must be accessed immediately, directly and without risk at
any time� If access to the power switch cannot be ensured, an additional emergency stop
switch that can be easily accessed must be installed in the work area�
!
Notice!
› Set up the device in a spacious area on an even, stable, clean, non-slip, dry and fireproof surface�
› The device has been constructed to the requirements of EU (European Union) and EFTA
(European Free Trade Association) countries�
› Insufficient ventilation may result in the formation of explosive mixtures� Only use the device
in well ventilated areas�
Safety instructions
/// General information
› Read the operating instructions completely before starting up and follow the safety
instructions.
› Keep the operating instructions in a place where it can be accessed by everyone�
› Ensure that only trained staff work with the device�
› Follow the safety instructions, guidelines, occupational health and safety and accident
prevention regulations�
› The device must only be used in a technically perfect condition�
!
Notice!
› Pay attention to the marked sites in Fig� 1�
!
/// Working with the device
Danger!
› Do not use the device in explosive atmospheres, it is not EX-protected�
› With substances capable of forming an explosive mixture, appropriate safety measures must
be applied, e�g� working under a fume hood�
› To avoid body injury and property damage, observe the relevant safety and accident preven-
tion measures when processing hazardous materials�
Warning!
› Process pathogenic material only in closed vessels under a suitable fume hood� Please contact
IKA application support if you have any question�
› When using critical or hazardous materials in your processes, IKA recommends to use ad-
ditional appropriate measures to ensure safety in the experiment� For example, users can
implement comprehensive monitoring equipment�
Caution!
› Do not start up the device if:
- It is damaged or leaking
- Cable (not only the power cable) is damaged�
We declare under our sole responsibility that this product corresponds to the regulations
2014/35/EU, 2006/42/EC, 2004/108/EC and 2011/65/EU and conforms with the standards or
other normative documents: EN 61010-1, EN 61010-2-010, EN 61326-1, EN 60529, EN ISO 12100
and DIN 12876-1�
A copy of the complete EU Declaration of Conformity can be requested at sales@ika�com�
Indicates the risk of fire or explosion!
Warning!