8
9
Intended use
///
Use
The
MultiDrive basic
device is a batch mill / mixer that can be operated with different vessels�
With this device and different vessels, a variety of grinding (impact grinding, cutting grinding)
and mixing tasks can be performed in the laboratory�
›
Milling:
Impact milling:
For use with hard, brittle material, dried material or material that is brittle
because of cold (for example grain, coffee, etc�)� The granularity of the final product is de-
termined by the duration of the grinding, the level to which the container is filled and the
physical property of the material being processed�
Cutting milling:
For use with soft, fibrous grinding material (for example hay, paper, etc�)�
In this case as well, the granularity of the final product is determined by the duration of the
grinding, the level to which the container is filled and the physical property of the material being
processed�
› Blending:
For mixing and emulsifying food (for example ice cream, milk, and sauces) and other
substances� It can be widely used in microbiology and food science field�
Intended use:
Tabletop device
Caution!
› Please pay attention to avoiding hand injury when operate the device�
› The vessel may be very hot after operation� Allow it to cool down before remove it from the
drive� Use your personal protective equipment�
› Hearing protection must be worn when working with the device in high speed�
!
Notice!
› The device must be operated on flat surface and must not be moved during operation�
› Covers or parts that can be removed from the device without tools must later be refitted to
ensure safe operation� This will prevent the infiltration of foreign objects, liquids and other
contaminants�
› The vessel must always be closed during operation� Switch off the device immediately if any
material leaks from the vessel� Clean the device after disconnected power plug�
› The feet of the device must be clean and undamaged�
› The device is designed for short term operation� The maximum operating time is 5 minutes�
After that, it should be switched off for 10 minutes to cool down�
› As long as the set speed is not reached, the speed value flashes�
///
Range of use
Indoor environments similar to that a laboratory of industry area (EMC class A)�
The safety of the user cannot be guaranteed:
› if the device is operated with accessories that are not supplied or recommended by the
manufacturer�
› if the device is operated improperly or contrary to the manufacture’s specifications�
› if the device or the printed circuit board are modified by third parties�
/// Disposal instructions
› The device, accessories and packaging must be disposed of in accordance with local and
national regulations�
/// Maintenance
› The device must only be opened by trained specialists, even during repair� The device must
be unplugged from the power supply before opening� Live parts inside the device may still
be live for some time after unplugging from the power supply�
/// Power supply / switching off the device
› The voltage stated on the type plate must correspond to the power voltage�
› The device can only be disconnected from the power supply by pulling out the power plug
or the connector plug�
› The device must only be operated with the original power cord set�
› The socket for the power cord must be easily accessible�
› Socket must be earthed (protective ground contact)�
› The device does not start up again automatically following a cut in the power supply�
/// Accessories
› Protect the device and accessories from bumping and impacting�
› Check the device and accessories beforehand for damage each time when you use them� Do
not use damaged components�
› Safe operation is only guaranteed with the accessories described in the ”Accessories” section�
› Disconnect the power plug before attaching or changing any accessories�
Summary of Contents for MultiDrive basic
Page 1: ...IKA MultiDrive basic...
Page 2: ...3 ENGLISH...
