IKA LR 2000 V, Operating Instructions Manual

Page: 17 / 29

The IKA -laboratory system requires little maintenance. Ball bearings are sealed and permanently lubricated. The following bur-
nished parts should be oiled once a month (see fig. 1 and 2):
- End plate of telescopic stand
- Clamping ring of telescopic stand
- Washers on rotary point of collets
- Threaded spindle and spindle nuts of container clamping device
- Retaining clips for ULTRA-TURRAX-drive
When ordering spare parts, please quote type of instrument and serial number as well as ident-number of the spare part.
If you require spare parts, please ask for the corresponding service papers for determining spare parts.
Repair
If you require servicing, return the appliance in its original packaging. Storage packaging is not sufficient. Please also use suita-
ble transport packaging.
Designation Id.No. Id.No.
(
FKM
) (FFPM)
b O-ring 17 x 2,5 25 104 00 24 983 00
c O-ring 159 x 6,0 25 118 00 24 986 00
d O-ring 48 x 2,0 25 119 00 24 988 00
e O-ring 37 x 2,0 25 112 00 24 984 00
f O-ring 26 x 2,0 25 115 00 24 985 00
g Centering ring 25 894 00 25 184 00
Designation Id.No.
h Plug NS 29/32 19 707 00
i Plug NS 14/32 19 710 00
j Wiper 25 053 00
k Wiper 25 052 00
l Container guideway 25 069 00
a PS-SEAL high-efficiency 19 206 00
sealing
Maintenance
Spare parts
In case of repair the device has to be cleaned and free from substances which may constitute a health hazard
as well as from caustic constituents.
Wear parts
16
Fig. 4