IKA C-MAG HS7, Manual

Page: 45 / 220

Interfaces and outputs 45
The following table summarises the (NAMUR) commands
understood by the IKA equipment.
IN_NAME Read the device name
IN_PV_1 Read actual external sensor value
IN_PV_2 Read actual hotplate sensor value
IN_PV_4 Read stirring speed value
IN_PV_5 Read viscosity trend value
IN_SP_1 Read rated temperature value
IN_SP_3 Read rate set safety temperature value
IN_SP_4 Read rate speed value
OUT_SP_1 Adjust the set temperature value
OUT_SP_1 100 Set temperature value
OUT_SP_4 Adjust the set speed value
OUT_SP_4 10 Set speed value
START_1 Start the heater
STOP_1 Stop the heater
START_4 Start the motor
STOP_4 Stop the motor
RESET Switch to normal operating mode
SET_MODE_n
(n=A, B or D)
Set operating mode
NAMUR Commands Function