22
Click on auf the measurement to be evaluated. Then click on the
“Evaluation“ button. The following screen with several tabs appears.
The parameters for the evaluation are distributed across the “Gross
Calorific Value“ and “Net Calorific Value“ tabs.
Note:
The
“
Net Calorific Value“ tab is not shown at calibration.
Now you can input the parameters required for the standard that
was selected (here: ASTM D 4809). The purpose and meaning of
these parameters and the relevant calculation formulae for the
complete results can be found in the respective standard. The
screens are adapted to suit the standard that was selected.
When you have completed the inputs, switch to the “Results
Sheet“ tab.
Here the complete data and results of the measurement are pre-
sented. You can save and print this form.
Click on OK to finish the evaluation. On each occasion you can cor-
rect and extend the evaluation for these measurements by looking
them up in the daily list or the library and selecting “Evaluation“.
You can view the trial parameters once again under the “Sample“
tab.
Evaluation
