ENGLISH
OPERATING THE MONITOR 33
Factory settings
Factory-preset data is restored.
Logo
iiyama Logo displayed when the monitor is turned on.
On
Off
iiyama Logo does not display when the monitor is
turned on.
Cancel
OK
Return to Menu.
APM
When there is no signal, the monitor will automatically
turn off .
Adjustment Item
Problem / Option Button to Press
General settings
Wake on lan
Switch on State
LED
Switch on delay
Logo
APM
DisplayPort ver.:
Picture
Sound
General settings
Network settings
Factory settings
Cooling fan
Network control port
Information OSD
Tiling
Switch on state
The monitor will remain standby when the power cable
is connected to a wall outlet.
On
Standby
Last status
The monitor will turn on when the power cable is
connected to a wall outlet.
The monitor will return to the previous power status
(On/Off /Standby) when removing and replacing the
power cable.
LED
Off
On
The power indicator is turned off .
The power indicator is turned on.
Switch on delay
Adjust the power-on delaying time (in seconds) allows a sequential
powering-on for each monitor by their ID number when multiple
monitors are connected. 0 - 60 seconds
Off
On
APM is turned off .
Information OSD
Off
Information OSD is turned off .
On
When you press the Power button turn on the monitor
from standby mode or change the input signal.
The information OSD is displayed on the upper left
corner of the screen.
Set the version of the DisplayPort.
1.1a/1.2
DisplayPort Ver.
Network control port
RS232C
Card OPS RS232C
When the RS232C is being used.
To use when inserting a computer to the OPS.
Off
On
Auto
Cooling fan
The Cooling fan is turned off .
The Cooling fan is turned on.
The fan turns on automatically when the monitor's
internal temperature reaches 60°C or higher.
Summary of Contents for ProLite LH4282SB
Page 2: ...ENGLISH ...
