Iiyama ProLite LH4282SB, User Manual

Page: 22 / 53

ENGLISH
18 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR THE MONITOR
Ensure that both the computer and the monitor are switched off .
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the RS-232C Cable.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor (Main Power Switch and Power Switch) and computer.
 The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
 Make sure you tighten the fi nger screws at each end of the Signal Cable.
 Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[Example of Connection]
<Back>
NOTE
or
Computer
AV Equipment
VGA Cable (Not Included)*
DVI-D Cable (Accessory)
HDMI Cable (Accessory)
Power Cable (Accessory)
RS-232C Cable (Accessory)
Audio Cable (Not Included)
HDMI Cable
(Not Included)
Notebook
GAME
Equipment etc.
DisplayPort Cable
(Accessory)
mDP-DP Cable (Accessory)
* VGA cable is not supplied with the monitor. If you use low quality VGA cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the VGA input.