ENGLISH
Menu : 2
(Digital)
H: 80.0 KHz V: 75.0 Hz
1280 × 1024
Menu:2
O f f
Lockout is canceled.
Japanese
Adjustment Item
Problem / Option Button to Press
OSD Position
1 2 3 4 5
You can move the OSD display area
to any one of the following 5 positions
within the overall display:
Italiano
Language
English
Deutsch
English
German
Français
Español
French
Spanish
Direct
Italian
You can skip the Menu pages and display an adjustment scale directly by using the following button
operations.
Volume:
Press the Volume Button when the Menu is not displayed.
Holding the Volume Button for 1-2 seconds will switch the Mute function between
ON and OFF.
Press the + Button to move the OSD in numerical order. Press
the – Button to move the OSD in reverse numerical order.
Too soft
Too loud
Volume
Direct
Lockout
All adjustment items except this function are
locked out.
On
Return to Menu
Highlight “Menu : 2” again.
Reset
NO
YES
Return to Menu.
Factory-preset data is restored.
NOTE
is displayed while Mute is active.
NOTE
is displayed while Lockout is active.
Analog
Digital
Select the Analog input (D-SUB).
Select the Digital input (DVI-D).
Signal Select
Signal Select: Press the Input Button when the Menu is not displayed.
Direct
Select either Analog or Digital for the signal input when both of the signal inputs are connected to
a signal source. Switch D-SUB and DVI-D whenever pressing the input button.
When only one of the two signal inputs is connected to the signal source, the one connected is
automatically selected. Input Button is not available if there is no signal input from the selected
connector or during the power management mode.
NOTE
OPERATING THE MONITOR 21
