ENGLISH
ENGLISH
Yes
Menu : 2
Problem / Option Button to Press
Adjustment Item
Color Temp.
Return to Menu
Highlight “Menu : 2” again.
Color 1: 9300K
Sharpness*
2
1 2 3 4 5
Adjust the picture quality at resolutions of less than 1280 × 1024.
You can change the picture quality from 1 to 5 (sharp to soft).
Press the + Button to change the picture quality in numerical
order. Press the – Button to change the picture quality in reverse
numerical order.
Auto Set-up *
1
*
2
No
Yes
Return to Menu.
Adjust Clock and Phase automatically.
Direct
*
1
For best results, use the Auto Set-up in conjunction with the adjustment pattern.
(See page 15 for SCREEN ADJUSTMENTS.)
Direct
Auto Set-up: Press the Auto Button when the Menu is not displayed.
1
NOTE
sRGB is an international standard which defines and unifies the difference of color
appearance between equipment.
You can not adjust the Gamma in sRGB mode because those settings are locked.
Off
Normal
Mode1
High contrast
Dark
Gamma
3
Mode2
Color 3: 6500K
Color 2: 7500K
sRGB
You can skip the Menu pages and display an adjustment scale directly by using
the following button operations.
Setting
The Auto Set-up is not performed when the
signal input is changed.
No
Adjust Clock and Phase automatically when the
signal input is changed.
Green
Red
Blue
Too weak
Too strong
2
s
is displayed while sRGB is active.
User
NOTE
The screen becomes dark for approximately five seconds during the adjustment.
OPERATING THE MONITOR 12
*
2
Avalible for Analog (D-Sub) only.
1280 × 1024
M e n u : 2
H: 80.0 KHz V: 75 Hz
PLE485S-e.p65
2004/09/14, 17:26
17
