ENGLISH
10 OPERATING THE MONITOR
AUTO ADJUST *
2
The picture position is
centerd in shorter time.
Sub-Menu
BRIGHTNESS *
1
DOS MODE
EXIT
CONTRAST
Too dark
Too bright
DISPLAY
Too dull
Too intense
Main Menu
Problem / Option Button to Press
V-POSITION
EXIT
SCALE
CLOCK *
2
PHASE *
2
H-POSITION
Return to Main Menu.
GEOMETRIC
DISP
EXIT
EXIT
AUTO
Return to Main Menu.
Too far to the left
Too far to the right
To correct flickering text or
lines
Strech the picture to fit
the full screen.
To correct flickering text or
lines
You can skip the Menu pages and display an adjustment scale directly by
using the following button operations.
l
CONTRAST: Press the +/- Buttons and then the Menu Button continuously when the Menu is
not displayed.
l
BRIGHTNESS: Press the +/- Buttons when the Menu is not displayed.
l
AUTO ADJUST: Press the Menu Button for more than 2 seconds when the Menu is not displayed.
SWITCHING CONTRAST / BRIGHTNESS ADJUSTMENT
To switch between Brightness and Contrast adjustments, press the Menu Button within
2 seconds after pressing the +/- Buttons during the direct adjustments above.
NOTE
*
1
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
*
2
See page 13 for SCREEN ADJUSTMENTS.
Direct
Direct
Direct
ADJUSTMENT MENU CONTENTS
Direct
640 × 400 @70Hz
720 × 400 @70Hz
Correct resolution of the two preset timings at 70Hz is selected.
Adjust the screen size at resolutions of less than 1600 × 1200. Displayed
text or lines may be blurred, or brightness may not be uniform when inputting
stripe pattern signal or the like.
NOTE
NOTE
D sub Input
720 × 400
Too low
Too high
